2012-02-07 8:07:25 - Не могу записать данные в файл: /home/felix/musicworldmedia.com///_cache/_plugins_sys/tnx/cache_musicworldmedia_com_59.txt
2012-02-07 8:07:25 - Не могу записать данные в файл: /home/felix/musicworldmedia.com///_cache/_plugins_sys/tnx/cache_musicworldmedia_com_59.txt
CD Player - Car Audio and Video

cd player?

Written by nchyperchick in Wednesday, February 20, 2008 under Car Audio
Comments: 0

Q: I just got this car, really nice, 99 volvo c70!
However; I can not get the 3-disc cd player to play burnt cds, it plays 'real' ones just fine!
Will it ever play burnt ones, someone said when the weather warms up it will?
Any suggestions?

A: Try a different brand of blank CDs. Also make sure when you burn the CD, do it as track at once and finalize the CD.

If that doesn't work, you maybe out of luck. Car systems prior to 2000 do not accept burnt cds because they werent popular back then. Burnt CDs are different from Original CDs because the dye on it was morphed, rather than having it stamped like the CDs that music studios make.

What audio format can work in sony cd players, and the car cd player?

Written by I'm Not Telling You. =) | Sunday, October 05, 2008

I'm using Memorex CD-R, and I need to know WHAt Audio Format will work in BOTH Sony CD Player, and the Car CD Players?


A: The only think that works in all players is regular CD-audio, where you burn a CD with tracks. Some players will read MP3 files off of a CD-R, but since we don't know what kind of players you have, this is not guaranteed. CD-R's are cheap, you could just try it and see.

Very ancient CD players may not work well with CD-R, but that would have to be something really old, like from 1990.

How do i install the orginal Cd player that came with my car?

Written by indiansfan5688 | Saturday, January 06, 2007

I just bought a 1999 Pontiac Sunfire, but it didnt have the orginal CD player with it. The one it has i absolutly hate, so i bought an orginal 1999 Pontiac Sunfire cd player off ebay. How would i go about taking out current player, and install the orginal one in its place?


A: well you loosen the bolts to the new CD player and take it out...then you unplug the cords there should be 2 diffrent the cd player cord and the herness cord then unplug the antenna big black wire and get your old cd player.... plug it up and put it back screw it and go! (unless you put a little coin box thing to substitute the space if you had a big stock cd player remove that and there!)(the screws are in the side)

how do i get a kenwood cd player to work in a rover 214?

Written by chris b | Monday, February 26, 2007

I recently brought a rover 214 and am having trouble wiring my kenwood cd player into it. The cd player has the following wires yellow red black orange/white blue/white brown the cars wires are as follows black=ground green/white=ignition purple=battery red/black=dimmers pink/white=? this is only going on what i have read on a rover forum, i have tried connecting the cd players yellow to the cars grren/white and red to the cars purple and this is all i know the cd player dosnt power on, would...


A: Kenwood wiring: Yellow permanent live, red ignition live, black earth, blue white is an output for an electric aerial I'm not sure about the orange white. The brown is for mute if connected to a carphone