where can I find a license plate mounting kit for the front of a new dodge challenger?

Written by jamers in Tuesday, February 03, 2009 under Dodge
Comments: 3

Q: The front end has a v shape to it. We saw another challenger that had a frame mounting kit that fit the v perfectly but we dont know where to get one.

In our state its illegal to leave the plate in the dash, it has to be on the front and rear bumpers.
We bought the car from a few hundred miles away. Because of that, the DMV sent the license plates directly to us and we had to install the rear ourselves.

A: Found one for relatively cheap and it's OEM. http://www.latemodelrestoration.com/iwwida.pvx?;item?item_no=DCP-68027815AA%201&comp=LRS

Comments: 3

mygif
D. M. Said in Tuesday, February 03, 2009

Call the automobile dealer where you bought the car. They should have them. They should install it and it should be free.

mygif
Justin Ramirez Said in Tuesday, February 03, 2009

HUH?

mygif
wrestlingnrj Said in Thursday, February 05, 2009

Any Dodge, Chrysler or Jeep dealer can get you the OEM bracket. Not sure what state you live in, but I know for a fact in California that the dealership has to have you sign a waiver if they don't put the front plate on for your since it's illegal to drive without one. I personally don't have a front plate because I think it looks much better without it. I've gotten a fix it ticket for it, but I just used some double sided tape to attach the front plate and pay my $10 to have...

Where can you find a mounting kit for an after market radio to install in a 1981 ford f600 grain truck?

Written by chevfan350 | Wednesday, April 29, 2009

BoxWave Mobile Mounting Kit Product Review

I have removed the factory radio because it was no longer functional, and am going to replace it, but I cannot find a mounting kit that will allow me to bolt the radio onto the dash. Any help please...


A: These are usually universal kits would try ebay.
If not available they can be made out of sheet steel 1mm thickness.

What kind of mounting kit do I use to install a new deck into a 92' Buick Regal?

Written by saddemon26 | Wednesday, May 07, 2008

BoxWave Mobile Mounting Kit Product Review

I have a 92' Buick Regal, and the factory deck is one of the 3 inch square ones at the top of the dash, below it and above the ash tray there is a 2inch tall and 8 inch long slot I can use,but do they make mounting kits for this kind of slot?


A: http://www.crutchfield.com/App/Product/Item/Main.aspx?g=112200&i=120992020&tp=3121

Where do i get a mounting kit for a Pioneer AVIC-F700BT that will fit my 2005 VW GTI?

Written by Caretaker | Friday, April 03, 2009

BoxWave Mobile Mounting Kit Product Review

i got the AVIC-F700BT installed and its poking out a little bit from the deck, and my sound guy said that it need a specific mounting kit to fit in there right. where do i find that?