How do you install a remote wire to an Aiwa CDC-X204 CD Player?

Written by chris_topher929 in Saturday, December 08, 2007 under Car Audio
Comments: 1

Q: I have an Aiwa CD player and i am not sure which wire to connect the remote wire to. I have everything hooked up except that. Or if there is a fuse i can connect it to, which one would be best? Thanks for any answers that you can give me, i would really appreciate it.

A: The wire should be blue or blue with white stripe, may be labeled as power antenna.

Comments: 1

mygif
sparky3489 Said in Saturday, December 08, 2007

Run a fused (1 amp, 14 AWG) wire from a fuse in the fuse panel that only has power when the car is ON to one side of a switch. From the other side of the switch run the same sized wire to the REM (remote) connection on the amp.

This allows for full control and you never have to worry about forgetting to turn off the amp. The switch is so you can turn off the amp at will so as not to give grandma a heart attack in the car.

You can find fuse taps at any autoparts...

how do i make an mp3 player work on an aiwa car stereo?

Written by nathan2005r1 | Monday, August 28, 2006

Soft focus for the Soft Eject

an older aiwa cd player with what looks like a earhpone jack on the front of it, with an aux mode. i want to hook up a personal mp3 player to it. i bought a cable that connects the two, but all i get is fuzz


A: If you don´t have an input jack, it's impossible.

Can someone help me fix my AIWA CD Player?

Written by Washington | Thursday, October 11, 2007

IMG_6268

I have an AIWA NSX V2100 Mini System. The 3-CD player tray will not open/close and it will not rotate between CD's when the buttons on the console are pushed. Can someone tell me how to fix this myself???? Thanks!


A: it sounds like its just stuck...turn it on in cd mode and take a pin or paper clip..insert it into the tray and try to pull it out...if that does not work slip a knife into the tray top and try to pull it out.

I have any aiwa mp3 player in my car, and the cd skips.It is a newcd, just burn at slowest speed for best qual

Written by P Dub | Monday, June 25, 2007

Xmas 2008

The cd always skips, and not in the same spot, so i know its not dirty or burnt incorrectly, it just stops playing like it is skipping. What is wrong with it. I burn it at the slow speed and they are cds are right out of the package. This doesn't happen with the ipod in the aux or the radio, just when I play my mp3s.


A: Try even slower speed burning - MP3's are different than regular CD audio because the deck has to convert it from MP3 in order for it to play.

If that doesn't fix it - you may need to run a head cleaner on the deck - or it may be a p.o.s. and just can't convert and play smoothly.

Aiwa Radio CD Cassette Player

Source: YAYA STORE






Aiwa Radio CD Cassette Player
Item Number : E001
Condition : Used
Size :
Weight :
Price : RM150 COD Only